Have a variety of paint bush sizes at the ready! I like working with smaller brushes, because it is easier to control, or rather, squiggled less of a mess for me to later correct.
You can find Gloss Enamels at Hobby Lobby, or most craft stores. There are other brands available, just be sure to read the directions for baking or curing the glassware. There are some available that require it to sit for 21 days before using! Gloss Enamels can bake in less than an hour in your own oven.
Chose a font and print out the initial you wish to paint. Cut it into a small piece that will fit into the glass.
Tape paper to the inside of glass, making sure it's positioned straight before you start painting. You can just trace the printout with the paint.
Make sure to keep you brush wet before dipping in paint, this will help for a smooth application on the glass.
Dip only the tip of the brush in paint, you do not want globs.
I lined the top rim of the glass, to finish it off.
I coated the base and stem as well, this took two applications to make sure it wasn't streaky.
It's looking good, but not quit done! I think some polka-dots will do the trick!
Using a flat round cylinder object, such as an eraser, is perfect for the little detail!
Gently press it against the glass. You may need to twist it slightly as you pull away, to keep the edges crisp and clean. I alternated between silver and black dots.
Let the glass dry a bit before handling. You can place multiple on the oven rack, just make sure none are touching! Follow the paint's label instructions for baking.
Check back, and I'll have some final shots to share of our festive setup to celebrate my friend and her soon-to-be nuptials!
No comments:
Post a Comment